- Distribuidores De Cojinetes Inc
- Rodamientos de bolas de empuje Rodamientos de rodillos esféricos Rodamientos de rodillos cónicos
Español
English
العربية
Deutsch
Ελληνικά
Français
Bahasa Indonesia
Italiano
日本語
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
- Dirección1589 Tampines Distribuidor Industrial Avenue 5 Singapur 528759
- Dirección Fábrica1589 Tampines Distribuidor Industrial Avenue 5 Singapur 528759
- Holario de Trabajo9.00--18.00
- Teléfono de la empresa(Holario de trabajo)0065-31591338
- Teléfono de la empresa(Teléfono de la empresa)0065-31591338
- Fax0065-31591338
Single Row Tapered Roller Bearings Inch
Contacta ahoraSingle row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (→ product table): the larger the value of e, the larger the contact angle.
Bearing features
Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|